Tuesday, January 03, 2012

How Wrenching On Your Own Bike Makes You More Awesome


That's one sexy rotor
This was going to be a post about how to change the stator on a Triumph Speed Four.  Then I remembered that there are about five other Speed Fours on the road, so it wouldn't be especially useful for very many people.  Also, as repairs go, it's pretty darned simple.  The most challenging issue is finding the cause of the problem.  The rest is spinning a wrench, which you can probably find a video about on YouTube if you need a little extra help on the Righty-Tighty, Lefty-Loosey concept.

Cost savings aside - which were substantial in this case, a few hundred dollars at least - there is a great deal of value in pulling your bike apart, fixing the problem and then putting it all back together the right way.

For one thing, it takes a good deal of courage just to start the job if you don't already have experience working on mechanical things.  I pulled a lawn mower engine apart and put it back together back in high school and I still get nervous before tackling a new repair.  And the idea of checking the valve clearances on this bike makes me break into a cold sweat.

Next up, it forces you to be persistent.  Especially when the bike is your main mode of transportation.  Nothing ever goes smoothly, there's always a challenge of some sort.  For example, rare is the repair that doesn't require removing other critical parts - hoses, the gas tank, a carburetor, etc. - in order to get to the broken one.  After the troubleshooting, removing those bits is usually the most difficult part of the job.  And then you've got to get them all back into place.  A lack of persistence means a non-running bike (case in point, the VX800 languishing in my garage...).

Taking a closer look at the issue of parts you have to remove in order to get to the part you're interested: working on a motorcycle forces you to be careful and methodical.  It's best to learn this lesson before you find yourself staring at a Ziploc bag containing a couple different springs, several bolts in varied sizes and a note that says "carb and fuel pump."  You'll have a chance to learn this lesson again when you drop one of those bolts into some inaccessible part of the bike and spend an hour trying to fish it out with a flashlight and a wire clothes hanger. 

Along the way, you'll get plenty of opportunities to practice your troubleshooting skills.  Motorcycles are reasonably simple machines, but they're still made up of several systems that have to work together correctly in order to deliver the necessary air, fuel and spark the motor needs in order to run.  Every system added increases the complexity a bit, and modern bikes have quite a few systems. 

Which leads into the final point.  To the uninitiated, a motorcycle may as well be a kitchen appliance, just like cars.  It's a hunk of metal that does a particular thing.  When it stops doing its particular thing, call a repair shop.  For those of us in the know, a motorcycle is far more than an appliance, and deserves personal care and respect.  Working on your own bike lets you get to know each system, and see how they work together.  Ultimately, you end up with a much better understanding of how your bike works, which is a very good thing.

Especially when you finally run into something you can't/don't want to do and the mechanic tries to tell you the problem is that you're low on blinker fluid.

As in every situation, knowledge is power, and doing your own wrenching will increase your level of knowledge in a hurry.  When you use the skills you developed (while trying to get your own infernal machine on the road again) to solve a problem for someone else, they will be impressed.  Beers and high fives will be forthcoming, and you'll be glad for the bloody knuckles and frustration you endured trying to get that confounded oil filter loose.

4 comments:

RichardM said...

Having been brought up with the "leap before looking" mentality, I tend to take apart just about anything. The one exception is my wife's vehicle. That gets taken into a shop for someone else to deal with. I guess that's why I like older vehicles that you can actually work on especially for a long trip. I think this means I'm old and set in my ways...

redlegsrides said...

I echo RichardM's preference for older motorcyles and their comparitive simplicity when stacked against modern motorcycles and their "improvements".

When taking things apart the first time, I tend to take photos as I go so I can figure out how it goes back together hopefully.

But yeah, it takes a bit of courage, some desperation and mostly (on my part) an unwillingness to wait for some stranger to "maybe" do the job right. It may take me longer but in the long run, I know it was done right...or if I break it, I learn something not to do next time! :)


Besides, that's why one has a spare motorcycle right?

dom

Redleg's Rides

Colorado Motorcycle Travel Examiner

Anonymous said...

I've owned a few Chevy trucks and got pretty good at working on them, saving myself a lot of money along the way. Brake jobs, tune-ups, etc. When I bought my Road King I also bought the repair manual. It's as thick as a phone book! I'm willing to do some minor stuff on the bike along the lines of 'parts off, parts on', but I'll leave the serious stuff to a trained mechanic. There's things on a motorcycle that are foreign to cars and trucks, like the belt drive system and fluid-filled forks, that I simply don't know how to mess with yet. But I intend to learn as much as I can so I can be as comfortable wrenching on my bike as I have been on pickup trucks. There's great satisfaction when you DIY.

Lucky said...

Richard - You are a wise man.

Charlie6 - Taking photos is a great idea. My high school shop teachers told us to draw diagrams, which I do when things are complicated. And having a spare motorcycle is always a good plan.

No Name - I dig it. There are definitely repairs I would prefer to let someone experienced handle. And there is definitely a sense of satisfaction when a DIY repair works!